4. Timer: Press ‘Timer’ button to set the fan running time between 0-12 hours, which switches the unit to standby
after preset time. Each time the button is pressed, the hours will increase one by one and the time indicator will
light on the screen.
To cancel the timer, simply press the button until the indicator shows”00”
5. Swing: Press 'Swing' button to change the wind direction. The swing icon will appear on the screen when the
function is activated. Press the button again to stop the oscillation. The vertical direction of air flow can be
adjusted manually by directing the outlet louvers up and down.
6. Cooler: this button is not available
7.Ionizer: Press ‘Ion’ button to activate the ionizer function. Ion icon on the screen will light and the negative
anion release will start. Anions attract to tiny particles in the air such as dust, pollen, mold spores etc. Which
cause them to become too heavy to remain airborne. This feature let us to have dean air in the environment.
Operating the Water Tank
Check the level of water in the tank frequently. Be sure that water level is not below the ‘MIN’ marking which is
located on the water tank. Activating the ‘Cool’ function with insufficient amount of water may cause
malfunction of the water pump and the warranty of your product will be void.
Before refilling water, turn your unit to ‘Off’ position by pressing the switch located on the back panel and unplug
the power cord.
Using the Ice Boxes
In order to increase the cooling effect of your fan, you can use ice boxes which are supplied with the unit. Before
using, place them in the freezing compartment of your refrigerator for a few hours. Then place them into the
large section of the tank and add water to the ‘MAX’ level. Using the ice boxes will drop the temperature of the
air flow which will create more effective cooling effect.
CLENNING AND MANTENANCE
After operation for long time, the dust cumulated in the dust filter or cooling pad may influence the inflow of air.
Therefore it is recommended to clean your fan regularly. Please follow the steps below to clean your device.
Turn off the unit and unplug the power cord before cleaning and maintenance.
Dust Filter
To remove the dust filter, first remove the screw, then simply press the locks with both hands and pull it out. Use
neutral cleaning agent and brush to clean the dust and dirt on the filter. To attach the clean filter, place the
bottom of the filter first and then push upper part until it is locked tightly.
Cooling Pad
After removing the dust filter you can see the cooling pad. Press the lock in the middle and gently pull out the
pad. Use a clean or soft brush to remove dust and dirt from the pad. Rinse with water if needed and leave it to
dry in open air. Never use any chemical cleaning solution that can harm pad.
Water Tank
Turn the water tank lock to horizontal position and pull the tank. Use soft cleaning agents for cleaning. Wash
with water and rinse the place it to its housing by pushing gently. Turn the lock to vertical position.
Exterior Cleaning
Clean the exterior case of the fan with a soft damp cloth except control panel. Never use hard cleaning agent
that can harm the case. Make sure the unit is dry before operating it.
Caution: Never let water contact with the control panel. Always clean it with a soft dry cloth.
Attention:
Must unplug the power plug when cleaning.
Don't make the water into the control panel.
DO NOT USE ANY DETERGENTS, PETROL OR ABRASIVES
