Do not use the device in the immediate vicinity of a bathtub, shower
or swimming pool.
Prevent the cord and plug from any contact with water or moisture.
Do not spray any liquid on the device.
Unplug the device holding the plug; do not pull the cord.
Unplug the device if it is to be moved or is not going to be used for a
longer time.
Do not use the device with the protection grid removed.
Transport in an original package protecting from mechanical damages.
The appliance must be repaired by a qualified person using only
original spare parts.
Despite operating the unit in accordance with its intended use and in
accordance with all safety guidelines, it is impossible to eliminate all
residual risk factors.
The appliance is intended for home use only.
The appliance should only be used for private use, as intended for the
appliance. This appliance is not intended for commercial use.
Unplug the device before cleaning, maintenance and filling the tank
with water.
It is recommended to connect the device to the power supply network
equipped with a residual current device (RCD) with a switch-off current
of 30mA or less.
NOTE! Do not cover the mesh cover of the climator unit.
NOTE! Do not put anything into the protection grid.
DESIGNATION
The climator unit
is designated for ensuring
temperature comfort in a room by means of air blow. The climator
unit is a fan-like device.
Thermal comfort is improved by water evaporation. Cooling the air by evaporation is a natural cooling method
resembling the effect of wind at a water reservoir which lowers temperature and has a relaxing, cooling impact
on people.
When cold water enters the air, the result is a mixture of air and water particles. This change requires a higher
temperature which is why energy or latent heat are taken from water particles that lower the existing air
temperature.
Thanks to this function, it is possible also to remove any dust, pollen and other pollutants, ensuring cool, fresh
and clean air.
A stronger cooling effect can be obtained by using freezer packs.
The packs should be filled with water in the amount marked on the packaging. Freeze the water (pack) in a
household refrigerator and then insert it in cold water in the device tank.
It is also possible to add ice cubes into the device water tank.