Ravanson GO-3, User Manual

Page: 10 / 22

10
WARNINGS INFORMATIONS
IMPORTANT:
Read the following instructions carefully and be sure your barbecue is properly installed, assembled and cared
for. Failure to follow these instructions may result in serious bodily injury and/or property damage.
If you have any questions concerning assembly or operation, consult your dealer.
Your barbecue can be used with gas cylinders between 11 kg and 15 kg. The maximum size of the gas cylinder
should be: Dia. 320mm, Height: 600 mm. Follow the technical information as stated in the instruction manual
and Check with your local gas supplier to have a suitable gas cylinder for your barbecue.
Hotplate burner pan: The max. pan Dia. is 195 mm, the min Dia. should be 120 mm.
NOTE FOR CONSUMER: Retain for future Reference
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
The device can be supplied with gas in family 3: 3B/P – propane butane.
To connect the gas, use a pressure reducing valve with the rated gas pressure of 37 mbar and flexible hose.
The hose should be secured to the regulator and the appliance with hose clips. Make sure the flexible hose
could not come in contact with hot surface and avoid twisting.
Use a suitable regulator that is certified to EN 16129. To connect the gas, use a pressure reducing valve with
the rated gas pressure of 37 mbar.
Please consult your LPG dealer for information regarding a suitable regulator for the gas cylinder.
Regulator and Hose
Use only regulators and hose approved for LP Gas at the above pressures (37 mbar). The life expectancy of the
regulator is estimated as 2 years.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before
operating the barbecue.
The hose used must conform to the relevant standard for the country of use. Worn or damaged hose must be
replaced. Ensure that the hose is not bstructed, kinked, or in contact with any part of the barbecue other than
at its connection.
For Flexible hose:
Avoid twisting the flexible tube when the appliance is in use. The length of flexible hose shall not exceed 1.5m.
The hose should certified according to applicable EN Standard and comply with local code.
Storage of Appliance
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the
appliance. When the appliance is not to be used for a period of time it should be stored in its original packaging
and stored in a dry dust free environment.
Gas Cylinder
The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder must be
disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from the appliance.