12
TO OPERATE YOUR AIR PURIFIER:
1. Plug into a 220V 50Hz electrical outlet.
2. Press down “ Power switch/Wind speed button”, one beep “Bi” can be heard, the air purifier starts
to run under the default speed (High setting) and its corresponding LED turns on. If you want to select
other settings, you can press “ Power switch/Wind speed button” to select your desired speed setting
(Medium setting and Low setting). After select, its corresponding LED will turn on.
Note: It is suggested to make the air purifier run under Medium setting if it is needed to be run
continuously. For quieter operation (such as in a bedroom), select the “Breeze/Sleep mode”. When in
an environment with polluted air, it is suggested to select High setting to quicken the air circulation.
3. You can activate the timer after turn on the air purifier and select your required speed setting by
following the operation as below: press down “Timer” button on the control panel, one beep “Bi” can
be heard. There are 4 settings including 1H, 2H, 4H and 8H. After select your required timing, its
corresponding LED turns on. When the timer expires, the air purifier will power off automatically and
the LED will extinguish.
4. To release negative ions into the filtered air, press the “Ionizer button”, and one beep “Bi” can be
heard and its corresponding LED will turn on.
Note: The ionizer will not work unless the unit is running.
5. Press down “Oscillation button” to make the air purifier oscillate if you like, at that time, one beep
“Bi” can be heard and its corresponding LED turns on.
5. If you want to make the air purifier stop running, just need to press “ Power switch/Wind speed
button” once. And the air purifier will stop working after hearing one beep “Bi”.
MAINTAINCE & CLEANING
（
Note: Please unplug the appliance before maintain or clean it.
）
Appliance Surface
Please do regular clean the dust inside and outside, to avoid dust gathering.
1
）
Use soft and dry cloth to clean the surface of appliance.
2) Use soft and dry cloth to clean the air inlet and outlet of appliance.
(Note:-Do not immerse the appliance in water or liquid.
-Do not use any corrosive or flammable liquids to clean the appliance.
-
Do not wash the HEPA filter)
FILTER REPLACEMENT INSTRUCTIONS
1. On average, HEPA filter needs to be replaced every 6 months. Filter life will vary depending on air
quality and usage.
2. Turn off and unplug the air purifier before attempting to replace the filter.
3. Press the tab of air inlet grill to open the grill and then remove the HEPA filter.
4. To replace the HEPA filter, discard the old HEPA filter. Do not attempt to clean. And then install a
new HEPA filter well in position, make sure that the primarily efficient filter shall be pointed outwards.
5. Replace the air inlet grill back in position.
TROUBLESHOOTING
Problem Solution
• Unit will not operate.
✔
Check to make sure the unit is plugged in.
✔
Check to make sure the unit is on.
• Decreased air flow.
✔
Make sure the filter is properly installed and firmly close the air inlet grill.
✔
Check condition of the filter and replace if necessary.
✔
Check to ensure nothing is blocking the air inlet and filtered air outlet.
