7105-M007-0
INSTRUCTIONS FOR
ASSEMBLY AND USE
Page 8 of 19
GB
G1000A99NP - G800A121NP
7.0 MOBILIZATION
THE LIFTING EQUIPMENT MUST WITHSTAND
A MINIMUM RATED LOAD EQUAL TO THE
WEIGHT OF THE DEVICE (SEE PARAGRAPH
TECHNICAL SPECIFICATIONS). DO NOT AL-
LOW THE LIFTED DEVICE TO SWING.
If the device has to be moved from its normal work
post, the movement must be conducted following the
instructions listed below.
• Protect the exposed corners with suitable material
(Pluribol/cardboard).
• Do not use metallic cables for lifting.
• Disconnect all machine power supply sources.
• Lift and transport with suitable device with adequate
dimensions.
8.0 WORKING ENVIRONMENT CONDI-
TIONS
The device must be operated under proper conditions
as follows:
• temperature: 0° + 55° C
• relative humidity 30 - 95% (dew-free)
• atmospheric pressure: 860 - 1060 hPa (mbar).
The use of the device in ambient conditions other than
those specified above is only allowed after prior agree
-
ment with and approval of the manufacturer.
8.1
Installation space
Fig. 2
USE THE DEVICE INDOORS OR IN A ROOFED
AREA. PLACE OF INSTALLATION MUST BE
DRY, ADEQUATELY LIT AND IN COMPLIANCE
WITH APPLICABLE SAFETY REGULATIONS.
The installation of the lifting device for wheel need
a useful space, on the side of the machine, of mm
600x1000 (as indicated in
Fig.
_
2
) through the broken
line.
The operator must be able to see the entire equipment
and the surrounding area from the control position. He
must prevent unauthorized personnel or objects that
could be dangerous from entering the area.
8.2 Lighting
The machine does not require its own lighting for
normal working operations. However, it must be used
in an adequately lit environment.
In case of poor lighting, use lamps having total power
800/1200 Watt as envisaged by UNI 10380.