Rauch QUANTRON-K2, Instruction Manual

Page: 81 / 102

Spreading operation using the QUANTRON-K2 Control unit
75
5
5.2.4 Adjusting the spreading width using the Dispersion AUTO function
Winter service spreader with HydroControl (Q-100-HC, Q-200-HC)

Press the L/R key multiple times until the display shows the symbols [1] for
adjusting the working width.
Figure 5.8: Working width adjustment (Dispersion AUTO function activated)
When adjusting the working width [5] using the F1 and F2 [1] function keys, the
QUANTRON-K2 control unit automatically adjusts the disc speed [2], the position
of the metering slide [4] (depending on the forward speed) as well as the spread-
ing width limiter plates [3].
Winter service spreader without HydroControl (Q, Q-100, Q-200)

Press the L/R key multiple times until the display shows the symbols [1] for
adjusting the working width.
When adjusting the working width [5] using the F1 and F2 [1] function keys, the
QUANTRON-K2 control unit automatically adjusts the position of the metering
slide [4] (depending on the forward speed) as well as the spreading width limiter
plates [3].
5
4
2
3
1
114