Rauch QUANTRON-K2, Instruction Manual

Page: 46 / 102

Operation QUANTRON-K2 4
40
4.5.8 Spreading material list
In this menu, you can create and manage your own Spreading material lists .
Creating a new spreading material list
You can create up to 30 spreading material lists in the control unit.
1. Call up the Spreading mat. Settings > Spreading material list menu.
Figure 4.10: Spreading material list menu
[1] Display of the active spreading material list
[2] Display of the spreading material list filled with values
[3] Spreading material list name field
[4] Empty spreading material list
2. Highlight the name field of an empty spreading material list.
3. Press the Enter key .

The selection window is displayed.
4. Highlight the Open element... option.
5. Press the Enter key .

The display shows the Spreading mat. settings menu and the selected
element is shown as the active spreading material list in the spreading
material settings.
6. Highlight the Spreading material name menu entry.
7. Press the Enter key .
8. Enter the name for the spreading material list.
9. Editing the parameters of the spreading material list .
See chapter 4.5: Spreading material settings, page 29 .
NOTICE
Selecting a spreading material list influences the spreading material settings at
the control unit and at the winter service spreader. The application rate setting
remains unaffected.
NOTICE
We recommend giving the spreading material list the name of the spreading mate-
rial. Thus it is easier for you to assign a spreading material to the spreading chart.
1
2
3
4