Rauch QUANTRON-K2, Instruction Manual

Page: 79 / 102

Spreading operation using the QUANTRON-K2 Control unit
73
5
5.2.3 Winter service spreader with two actuators for the spreading width limiter and an
actuator for the half-side slide (Dispersion AUTO deactivated)
The option with 2 installed actuators for spreading width limitation and actuator
for the half-side slide enables switching from a symmetric to an asymmetric
spreading pattern with adjustment of the application rate while spreading.
1. Select the desired function for spreading width limitation using the L/R key.
Select the side for the spreading width limiter plates that you wish to adjust
by pressing the
L/R key multiple times.

Left

Right
Figure 5.6: Asymmetric spreading pattern (example)
Spreading width adjustment to the road during spreading operation.

F1 [1]: Lower the spreading width limiter plates on the desired side.

F2 [2]: Raise the spreading width limiter plates on the desired side.

Use the Menu key to navigate to the Half-side slide menu and set the desired
value.
1 2