Rauch QUANTRON-A, Instruction Manual

Page: 41 / 120

Operation QUANTRON-A
35
4
4.3.1 Trip counter
This menu provides the following values:
- kg spread (kg)
- ha spread (ha)
- m spread (m)
Figure 4.3: Trip counter menu
[1] Display of the quantity spread since the last reset
[2] Display of the area spread since the last reset
[3] Display of the spreading distance since the last reset
[4] Clearing the trip counter: all values to 0
Delete trip counter:
1.
Open the sub-menu Weighing - Trip count. > Trip counter .
 The display shows the values recorded for the amount of material spread,
the area covered and the distance covered
since the last time the
counter was cleared .
The Delete trip counter field is highlighted.
2. Press the enter key .
 All of the trip counter values are reset to 0.
3. Press the kg key.
 This returns you to the operating screen.
Checking the trip counter during spreading:
During the spreading work, i.e. with the slides open, you can change to the
Trip counter menu and obtain the current values there.
NOTICE
If you wish to continuously observe the values during the spreading work, you
may also assign the freely selectable display fields on the operating screen with
kg Trip , ha Trip or m Trip , see 4.10.2: Display configuration, page 76 .
1
2
4
3