Technical data
27
4
4.3.2
Technical data of basic equipment
Dimensions:
Data
MDS 8.2
MDS 14.2
MDS 18.2
MDS 20.2
Overall width
108 cm
140 cm
190 cm
190 cm
Overall length
124 cm
128 cm
130 cm
130 cm
Filling height
(basic machine)
92 cm
104 cm
93 cm
101 cm
Distance between centre of gravity and
lower link coupling point
55 cm
55 cm
55 cm
55 cm
Filling width
98 cm
130 cm
180 cm
180 cm
Working width
a
10 - 24 m
10 - 24 m
10 - 24 m
10 - 24 m
PTO speed
minimum
450 rpm
450 rpm
450 rpm
450 rpm
maximum
600 rpm
600 rpm
600 rpm
600 rpm
Rated speed
540 rpm
540 rpm
540 rpm
540 rpm
Capacity
500 l
800 l
700 l
900 l
Mass flow
b
maximum 250 kg/min
250 kg/min
250 kg/min
250 kg/min
Hydraulic pressure
maximum
200 bar
200 bar
200 bar
200 bar
Sound pressure level
c
(in the closed driver's cab of the tractor)
75 dB(A)
75 dB(A)
75 dB(A)
75 dB(A)
a. Working width depending on fertiliser and spreading disc type (maximum 24 m)
b. Maximum mass flow depending on fertiliser type
c. Since the sound pressure level of the machine can only be determined when the tractor is running, the actual meas-
ured value is greatly dependent on the tractor type being used.
Summary of Contents for MDS 14.2
