Rauch AXMAT DUO, Instruction Manual

Page: 33 / 44

Operating the AXMAT system
29
4
4.2.2 Adjusting the drop point
The machine control unit automatically switches to the third calibration window.
Figure 4.10: Performing AXMAT calibration
1. Determine the drop point.
Press the
OK button to confirm the previously saved drop point.
Press the New drop point button to enter a the new drop point.
2. Enter the new drop point value based on the results read and the correction
recommendations.
3. Press OK .
4. Drive over the area again to check the adjusted value.
You have previously emptied the collecting vessels.

The drop point is stored in the fertiliser chart.

The AXMAT system is calibrated and functional.
NOTICE
You can enter values in steps of 0.5. The AXMAT function regulates the drop
point in steps of 0.1 during spreading operation.