Rauch AXIS-M 30.2, Instruction Manual, Page: 96 / 148

Spreading operation 8
88
Normal spreading in or out of the headlands tramline
If you continue spreading in the field after headlands tramline spreading:

Move the border spreading unit TELIMAT out of the spreading area.
Figure 8.8: Normal spreading
[A] End of spreading fan when spreading in the headlands tramline
[E] End of spreading fan when spreading in the field
[T] Headlands tramline
[X] Working width
The metering slides open or close at different distances to the field border of the
headlands when travelling backwards and forwards.
NOTICE
If you use a GPS System (e.g. QUANTRON guide) as well as the operating unit
QUANTRON-E2 and/or QUANTRON-A for operating your machine, check that
the software of the operating unit includes the
OptiPoint function.
The OptiPoint function calculates the optimal switching-on and switching-off
point for spreading in the headlands on the basis of the settings in the control
unit.

You can skip the information in the present paragraph since the OptiPoint
function assumes these settings.

Please observe the operator's manual for the corresponding control unit.
E
A
X