Rauch AXEO 16.1, Instruction Manual

Page: 45 / 136

Commissioning
37
6
7. Tighten the hex cap screw
and nut using a size 17
wrench (max. 35 Nm).
Figure 6.3: Connect the universal drive
shaft
8. Push the universal drive
shaft guard with hose clamp
over the universal drive shaft
and attach it to the transmis-
sion neck.
9. Tighten the hose clamp.
Figure 6.4: Mount the universal drive shaft
guard
10. Rotate the plastic ring until it
reaches its locking position.
11. Press the lubrication nipple
at the universal drive shaft
guard into a closed position.
Figure 6.5: Secure the universal drive shaft
guard