W
indows2000
6. Installing Windows 2000
58
6-2. Installing a new copy of Windows 2000 from Windows 98/NT4.0
Follow these steps through:
1.Start Windows 98 or Windows NT4.0.
2.You will see setup program of Windows 2000 running from the SCSI CD-ROM connected to the CB32U.
3.When setup starts, you can see two ways to install Windows 2000 on the screen:
-[Upgrade to Windows 2000(Recommended)]
-[Install a new copy of Windows 2000(Clean Install)]
4.Select [Install a new copy of Windows 2000(Clean Install)].
5.After typing in the Product Key, click [Advanced Options] on the [Select Special Options] screen
saying [To review or change the default Setup options for copying files, click (Advanced
Options)].
6.Check [Copy all setup files from the setup CD to the hard drive] on the [Advanced Options]
screen and click [OK] button.
7.Install Windows 2000, following the instructions.
8.Before you restart your system, remove the CB32U.
9.When you finish installing it, set up the CB32U if you need it.
6-3. Installing Windows 2000 with a Windows 95/98 startup disk
Follow these steps below:
1. Make a Windows 95/98 startup floppy disk, refering to Chapter 5-1 or 5-2. Then, have your SCSI CD-
ROM recognized by the Windows 95/98 startup floppy disk.
2. Format your internal HDD, if necessary.
3. Start [WINNT.EXE] in the [i386] directory in the Windows 2000 CD-ROM.
4. Install Windows 2000, following the instructions.
5. Before you restart your system, remove the CB32U.
6. When you finish installing it, set up the CB32U if you need it.
