Ratoc Systems CB32U User Manual Download Page 12

Page: 12 / 87

indows98

2. Setup

2-2-1. Installing the CB32U on Windows 98

1. Check to see if your PCMCIA Controller supports CardBus PC Cards.

a. Right-click on My Computer.

b. Select Properties. You will see the System Properties window below.

c. Click the Device Manager tab.

d. Double-click PCMCIA socket and make sure there is a CardBus controller name string without “!” or

“X” marks.

NOTE

If a CardBus controller name string does not appear, or if it appears with a “!” or “X” mark next

to it, enable the CardBus controller with PC Card (PCMCIA) Wizard. For more information,

please contact your PC manufacturer.

2-2. Windows 98 Setup

Here’s how to get started with the CB32U and SCSI devices on Windows 98:

1. Read the restrictions before you install the CB32U.

2. Install the CB32U into the PC. Refer to Chapter 2-2-1.

3. Confirm the installation. Refer to Chapter 2-1-2.

4. Remove the CB32U from the PC. Refer to Chapter 2-2-2.

5. Connect a SCSI device. Refer to Chapter 3-1.

6. Confirm the SCSI connection. Refer to Chapter 3-2.

Summary of Contents for CB32U
























































































Search results

Summary of Contents for CB32U

Reviews:

Related manuals for CB32U

Brands by name

Popular brands

Ratoc Systems CB32U, User Manual

Search results

Summary of Contents for CB32U

Reviews:

Related manuals for CB32U

Brands by name

Popular brands