15
The terminal machine shows below
˖
(1) Shift gear rocker arm
(2) Handlebar seat
(3) Throttle control
(4) Clutch handle
(5) Reverse handle
(6) Operating arm
(7) Drag bar
(8) Gearbox
2. The assembly and adjustment for pulling wire and clutch
wire
2.1 The assembly and adjustment for clutch wire
NOTE:
1) Loosen the locking nut to amplify the inner wire to the maximum length.
2) Put the inner wire through the hole of Clutch Rocker Arm and the inside
hole of Clutch/Reverse Double Hole Bolt.
3) Tighten the wire and fixed the Clutch Wire by screw the two rots of the
wire.
(
Serieal number
Summary of Contents for RG3.6-100Q-Z-II
Page 48: ...93004 U080410 0000...
