Part IV Wiring Diagram
17
3-4-2 Impeller/flywheel/ignition coil/charging coil
Therefore, the parts in the figure are key components. Please tighten the bolts according
to the torque table.
Too high torque will damage parts. Too low torque will result in unpredictable engine
damage, and in severe cases, it may cause casualties.
1)
Impeller
Please align the lug behind the impeller
with the hole on the flywheel during
installation.
2)
Flywheel
Remove the ignition coil and the charging coil
before removing the flywheel.
Bolt
M6×30
Bolt M8×16
Impeller
mounting
plate
Impeller
Flywheel bolt
Flywheel
gasket
Flywheel
Bolt M6×30
Charging
coil
Ignition coil
Spark plug cap
Stud
Please fix the clip in the
slot during installation.
Special flywheel pulling tool
