8
[EN]
Time interval system
Open the door to activate the time interval. Subsequently, press the *-key and choose a number between
0 and 9. Confirm this with the #-key. The time interval can be graded considering the following:
0
no time interval
5
5 minutes
1
1 minute
6
6 minutes
2
2 minutes
7
7 minutes
3
3 minutes
8
8 minutes
4
4 minutes
9
9 minutes
A signal tone arises to confirm the time interval.
Empty the safe
To empty the safe please open it as indicated above. Afterwards the internal part can be removed and opened
at the backside.
Close the safe
Close the door and press #.
Change of batteries
If the safe does not want to open the batteries could be dead. When the red light always flashes it means
that the batteries are running out. You need to replace with new ones. The lock is supplied with six pcs of AA
batteries, which you simply replace by opening the black plastic cover on the inside of the door. The POS safe
requires eight 1,5 Volt batteries (LR6 type, 15 x 50 mm).
Please note:
An optional 9 volt block battery can be used to power the box if the 1,5 volt batteries are comple-
tely drained.
