ratiotec rapidcount S 200, User Manual

Page: 6 / 26

6
Error messages S 200 | S 225 | S 275
The rapidcount S is a reliable banknote counter. Nevertheless, error messages can occur, according to the fact that
especially suspicuos banknotes are checked. As described in the previous chapter, the banknote counter automati-
cally configures each time it is turned on. This includes, among other things, a test of all sensors.
Error codes Action
SKEW BANKNOTE Please remove all banknotes and count again.
DOUBLE NOTE Please remove all banknotes and count again
MOTOR PROBLEM Turn off and check the banknotepath.
PROBLEM WITH HOPPER SENSOR Turn off, check sensor and try again.
PROBLEM WITH STACKER SENSOR Turn off, check sensor and try again.
PROBLEM WITH MG SENSOR Turn off, check sensor and try again.
PROBLEM WITH UV SENSOR Turn off, check sensor and try again.
PROBLEM WITH COUNTING SENSOR LEFT Turn off, check sensor and try again.
PROBLEM WITH COUNTING SENSOR RIGHT Turn off, check sensor and try again.
SUSPECT BANKNOTE Please check last banknote in stacker.
DIFFERENT DENOMINATION Please remove last banknote and press start.
BATCH FULL Please remove batch of banknotes or press start to count next batch.
[EN]