38
OPERATING
INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for cutting,
roughing and brushing metal and stone
materials without using water. For cutting
metal, a special protection guard for cutting
(accessory) must be used.
ASSEMBLY AND ADJUSTMENT
MOUNTING THE PROTECTIVE DEVICES
1. AUXILIARY HANDLE (SEE FIG 1)
For all work with the machine, the auxiliary
handle (3) must be mounted.
Screw the auxiliary handle (3) on the right or left
of the machine head depending on the working
method. (See A)
Do not make any alterations to the
auxiliary handle.
Do not continue to use an auxiliary
handle if it is damaged.
MOUNTING THE GRINDING
Before any work on the machine itself, pull
the mains plug.
Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
1. Spindle lock button
Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the
grinding tools, lock the grinder spindle (8) with
the spindle lock button (1).
Actuate the spindle lock button (1) only when
the grinder spindle is at a standstill!
2. Adjustable outer flange clamping (See Fig
2-1.2-2).
The outer flange (6) should be adjusted to suit
different disc thickness. For thinner cutting
or diamond discs the raised part of the outer
flange is fitted facing away from the disc. For
thicker grinding discs the raised part of the outer
flange is fitted facing towards the disc to provide
improved support for the disc hole. Always
ensure your disc is securely clamped.
3. Grinding/Cutting Disc(See Fig 2-3).
Pay attention to the dimensions of the
grinding disc. The mounting hole diameter
must fit the inner flange (5) without play. Do
not use reducers or adapters.
When using a diamond cutting disc, take care
that the direction-of-rota tion arrow on the
diamond cutting disc and the direction of rotation
of the machine (direction-of-rotation arrow on the
machine head) agree.
For mounting, see the Component list
illustration page.
Screw on the outer flange (6) and tighten with the
two-pin spanner (4).
Brida interior/Brida interior/Inner flange
Brida interior/Brida interior/Inner flange
Disco/Disco/Disc
Brida exterior/Brida exterior/Outer flange
Disco/Disco/Disc
Brida exterior/Brida exterior/Outer flange
