38
ATTENTION
: To prevent the premature worn-out of the sensor plug the sensor’s protection
cap when you are not using the Analyser!
App Menu: MIX ANALYSER
To use the Mix Analyser the separated RATIO® Gas Analyser is needed. Ask your local RATIO® distributor for this accessory.
ATTENTION
: DO NOT DIVE with the GAS MIX ANALYSER. It must be used only in surface!
Water would seriously damage the GAS MIX ANALYSER and the iX3M 2 computer if plugged!
The Gas Mix analyser is used to check the Oxygen% in the mix inside the tank.
Always remember that the safety approximation of the Mix has to be decided by the diver. If you are not sure about the
EAN safety approximation to be set for your dive, ask your diving instructor or your diving certification agency.
Plug the Gas mix connector to the iX3M 2 port and turn gently counter-clockwise.
ATTENTION
: Plug the Gas Mix Analyser to the iX3M2 BEFORE launching the MIX ANALYSER App or you will get a connection error.
Wait for the battery check and for the sensor calibration (about 30 sec.), than place the sensor near the tank and gently
open the cylinder ‘s valve to let the Analyser check the mix.
ATTENTION
: Please refer to GAS MIX ANALYSER Maintenance manual that you found in the Gas Analyser’s box for proper
maintenance and storage of the accessory.
miX analyser
o2: --.-
CALIBRATE
DEV FW 0.00
SET To MIX: 2
BACK SET - +
