33
CCR Settings for RATIO iX3M 2 Tech+
To navigate the menu follow the instructions in the picture on the left.
SETPOINT LOW:
Range 0.40 a 1.60. It is the starting setpoint.
DEPTH 1:
Automatic switch from SETPOINT LOW to SETPOINT MID and vice versa.
SETPOINT MED:
Range 0.40 a 1.60 (Step 0.05)
DEPTH 2:
Automatic switch from SETPOINT MID to SETPOINT HIGH and vice versa.
SETPOINT HIGH:
Range 0.40 a 1.60 (Step 0.05)
SETPOINT MODE:
AUTO
= During the dive the iX3M 2 will automatically switch from SETPOINT
LOW
to
SETPOINT
MID
at
DEPTH 1
, from SETPOINT
MID
to SETPOINT
HIGH
at
DEPTH 2
and (during
the ascending) from SETPOINT
HIGH
to SETPOINT
MID
at
DEPTH 2
and from SETPOINT
MID
to
SETPOINT
LOW
at
DEPTH 1.
MAN
=
The Set Point have to be managed manually during the dive.
(See “Change the set point during a dive” on this manual)
During the dive you can switch from AUTO to MAN,
During the dive you can NOT switch from MAN to AUTO.
(See “Change the set point during a dive” on this manual)
Attention
: Enable the Rebreather mode (CCR) only for dives with rebreather.
The CCR mode is not suitable for dives in open circuit!
Attention
: Diving with Rebreather requires a specific training !!!
Diving with Rebreather without a suitable training or without the due caution can cause injuries or death.
Refer to your Rebreather instructor to get instructions on how to set the SET POINT
.
For iX3M 2 Tech+
b
a
c
D
eXit
neXt
eDit
eDit
BACK
NEXT
<<
>>
CCR SETTINGS
SETPOINT 1:
0.70
DEPTH 1:
5m
SETPOINT 2:
1.30
DEPTH 2:
80m
SETPOINT 3:
1.10
SETPOINT MODE: AUTO
