Step 10: Programming the Emergency Phone(s)
Option 1:
Call Emergency Numbers Offsite, without Stopping at the SmartRescue
a. Press
Enter
to get into program mode
b. Press
1, Enter, (Emergency Number), Stop
c. If using 2 emergency numbers, press
2, Enter, (Emergency Number), Stop
d. Repeat for up to 5 total emergency numbers
e. To exit program mode, press and hold
Stop
for 2-3 seconds until warble sound
Option 2:
Call SmartRescue First, if No Answer Call Emergency Numbers Offsite
a. Press
Enter
to get into program mode
b. Press
1, Enter, (Emergency Number), Stop
c. Press
2, Enter,
(same
Emergency Number
as entered in b),
Stop
d.To exit program mode, press and hold
Stop
for 2-3 seconds until warble sound
Program the Location Message:
Note:
This is always done, unless your Call Center requests it not to be.
a. Press
Enter
to get into program mode
b. To turn on message, press
1, 3, Enter, 2
i. For no message, press
1, 3, Enter. 0
c. Press
6, Record,
(wait for beep, speak your message),
Stop
d. To program frequency of message, press
1, 3, Enter, ___
1 = Plays message once
2 = Plays message twice (this is standard configuration)
3 = Plays message until the called party presses
*
on their phone
e. To exit program mode, press and hold
Stop
for 2-3 seconds until warble sound
Page 9
**
The Elevator Industry
REQUIRES
the ability to call into each elevator from outside of the
building. For instructions on how to put each phone into Consolidator Mode, see page 12.
Page 8
Option 2:
Program the SmartRescue to allow the Emergency Phones to call the SmartRescue first, then outside
number(s).
1.
Hold down Red Disconnect and Sub-Master 1 buttons for 5 seconds
2.
Release buttons (you will hear a confirmation tone)
3.
Press Phone 2 button, then Red button, then the Phone 1 button
4.
Press Sub-Master 2 button, then Sub-Master 1 button (you will hear a confirmation tone)
**Used when staff is available to answer calls.
Note:
If you need to program the SmartRescue back to Default Mode, see page 12.
Summary of Contents for SmartRescue 10
Page 7: ...Page 7 Plug In Transformer...
