background image

Page 6

1.

 You can program the phone on-site or remotely.

 

Note:

 Cellular and 900 MHz applications cannot be remotely programmed.

2. If programming on-site, remove the face plate. Use the #10 spanner bit provided to remove the 6 security screws.

3. 

Remove the cover of the NEMA 4 enclosure by loosening the 4 corner screws.

Phone Programming

On-Site Programming:

Remote Programming:

Step 1: To Begin Program Mode

 

  A. Press 

Enter

Step 2: To Program Emergency Numbers

 

  A. Press 

1, Enter

, (phone number), 

Stop

 

      

Note:

 Press 2-5 in step 2A for emergency numbers 2-5 as needed

Step 3: To Program Location Message

 

  A. To turn on message Press 

1, 3, Enter, 2

 

  B. Press 

6, Record

 (speak message) 

Stop

 (to replay message 

Press 6, Play

)

             C. For no message Press 

1, 3, Enter, 0

Step 4: To Program Auto Disconnect Time (Default is 5 minutes, lowest interval is 1 minute)

 

  A. Press 

8, Enter,

 (3 digit number in minutes)

                 

Ex:

 2 minutes = 002

Step 5: To Exit Program Mode

             A. Press 

Stop 

for 3 seconds

Step 1: To Begin Program Mode

 

  A. Call into phone by dialing the number of the Tower

 

  B. After first simulated ring, Press 

#, #

 (Wait for 4 tones)

 

  C. Key in security code (Default is 1111) (Wait for confirmation tones) 

Step 2: To Program Emergency Numbers

 

  A. Press 

1, *, 

(Phone number), 

*, #

 (Wait for confirmation tones)

                

 Note:

 Emergency numbers (2-5) repeat step 2A pressing (2-5) as needed

Step 3: To Program Location Message

 

  A. To turn on message press 

1, 3, *, 2

 (Wait for confirmation tones)

 

  B. Press 

6, *

, (Speak message) 

#, *, #

 (Wait for confirmation tones)

 

      i. To replay message Press 

6, #

 (Wait for confirmation tones)

 

  C. For NO message Press 

1, 3, *, 0

 (Wait for confirmation tones)

Step 4: To Program Auto Disconnect Time (Default is 5 minutes, lowest interval is 1 minute)

 

  A. Press 

8, *,

 (3 digit number in minutes)

                

 Ex:

 2 minutes = 002

Step 5: To Exit Program Mode

             A. Press 

*, #, 0

 (You will hear a beep, beep) 

*, #

 (You will hear a buzz)

Keypad

Summary of Contents for 2100-TL9










Reviews: