RASOR ZERO702 Use Manual Download Page 9

EN

9

10.  RULES FOR THE CARE OF THE LITHIUM-ION BATTERIES

The following rules should be noted when caring for your lithium-ion batteries if you want

to maintain the performance of the energy store for as long as possible:

·

The first charge is crucial. Fully charge the battery before using it for the first time.

·

Each battery only has a limited number of charge cycles. Don't therefore recharge the

battery at every opportunity. Instead use it until it is almost flat (10...20% of charge).

Depending on  loading, the  high-quality,  3  Ah capacity battery cells can be  charged

up to 2,000 times. Assuming 250 days are worked a year and that the batteries are

charged daily, this corresponds to a battery life of 8 years.

·

IIf  the  battery  is  discharged  below  its  nominal  voltage,  this  can  trigger  processes

which damage or destroy the battery. The batteries are therefore fitted with electronics

which warn the user and shut down the device before total discharge can take place.

·

Frequent overcharging can also permanently damage the battery. The charger therefore

automatically finishes the charging process as soon as the battery is fully charged.Do

not attempt to force more charge into the batteries by unplugging and reconnecting

the charger. Such action will not produce a  higher charge - it will only damage the

batteries.

·

Charging should generally only be undertaken at room temperature (around 18 - 21

degrees).  Avoid  charging  a  cold  battery  as  it  damages  the  cells.  Always  warm  the

battery up to room temperature before charging, especially when it is cold outdoors

in  winter.

·

High temperatures also damage the battery. Never leave the battery, and preferably

not the entire tool box, in the car or direct sunlight on hot sunny days. At temperatures

above 60 degrees Celsius, the Li-ion battery permanently loses capacity.

·

Lithium-ion batteries shouldn't be stored flat or fully charged for long periods. Extensive

testing has found a capacity of 40...50 % and low temperatures (but not below 0°C)

to be optimum for storage. Ideally they should be kept at 5°C to 10°C. Recharging is

needed at least every 12 months as the batteries will self-discharge.

·

A battery which is not being used should be stored in a cool but not cold place. Even

when  not  being  used,  batteries  lose  energy.  The  Li-ion  battery  loses  3...5%  of  its

charge a month.

·

If a lithium-ion battery is not used for a long period, it should be recharged after 12

months at the latest otherwise it will be irreparably damaged.

·

Old,  used  batteries  must  of  course  be  disposed  of  in  an  environmentally  friendly

manner.

Summary of Contents for ZERO702





















Reviews: