12
EN
14. BLADE SHARPENING
After many hours of a continuative use of the battery scissors
or if they are not able to cut anymore, it is necessary to sharp
the blade. To carry out this operation, start the blade and
press sharpening button “1” for 3-4 seconds (as shown in
picture 7). Repeat this operation 2-3 times.
If the sharpening process should be ineffective, check the
wear of the emery grinding wheel “2” (see picture 7). If wheel
“2” is too worn or dirty, replace it by removing the blade with
the proper tool.
1
7
WARNING
The sharpening button can be only pressed if the front mobile protection is completely
lowered.
15. LUBRICATION
Every 3-4 days of use, it is necessary to lubricate the pair
of gears. To carry out this operation, remove protective
plug “A” located on the head of the battery scissors and
fill it with the supplied lubricating grease.
Screw plug “A” again few turns. Screw plug “A” some
turns every 2-3 working hours (see picture 8).
Fill the plug again, once it has been tightened.
The blade must never be dirty with grease or oil.
8
WARNING
A
2
