EN
7
7. FIELD OF APPLICATION
6. NOISE LEVEL
NOTE
It is advisable for bench cutter SW100’s owners to verify the compliance with the standard
concerning safety of workers: Italian legislative decree N.277 ITEM IV (DATED 15-08-91).
The use of ear protecting devices is compulsory.
The maximum acoustic pressure level emitted by bench cutter SW100 is about 60 dB (A).
Noise tests have been carried out in compliance with Standard ISO 11202 (1995). The
device noise levels, measured at different distances (without any sound wave filtering system),
vary in the extent of few db (A).
Bench cutter SW100 has been designed, manufactured and assembled to cut every kind of
fabrics or materials, with the exception of metal, plastic or wood, by means of rotary poligonal
blades.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- on wet or damp materials;
- to cut plastic, metal and wooden materials.
It is forbidden to use bench cutter SW100 for purposes different from the above-mentioned
ones.
5. TECHNICAL FEATURES
This technical data is only indicative and may be subject to change without notice.
100 mm with hard metal counter
blade
850 rpm
about 35 mm
Monophase 220 V - 90 W
1.00 AM
3000 g
4000 g
1,5 mt
LUX 200
< 2,5 m/s
2
0 ~ 55°C
10 ~ 95% without condensate
Temperature
Humidity
Weight with package
Electric cable lenght
Minimum luminosity for working
operations
Vibrations at the start up
Cutting working depth
Motor power
Weight (with feeding cable)
Bench cutter SW100 features
Blade diameter
Blade speed
Max. Absorption
6 side blade Ø 100 mm, in H.S.S. steel
Circular blade Ø 100 mm, in Extra steel
4 side blade Ø 100 mm, in Germany Extra
steel
6 side blade Ø 100 mm, in H.S.S. steel
covered with Teflon
®
®
6 side blade Ø 100 mm, in H.S.S. steel in
hard integral metal
Cutter circular blade Ø 100 mm, in Extra
steel
Features of the available blades
10EHSS
10SEXTG
10CFR
10EMD
10EHSSTF
10CSW