Rasonic RIC-S44E, Operation & Installation Manual

Page: 36 / 46

35
Ventilation fan stop operation.
Please contact Shun Hing
Electric Service Centre Ltd. for
checking and repairing.
Ambient temperature is too
high.
Switch off the appliance and
switch on again after it is
cooling down naturally.
Operation being
interrupted during normal
use and E3 error shown.
Is the cookware empty?
Put ingredients into the
cookware, and restart the
appliance when cooled down.
The ingredients’ and
cookware
temperature too high?
Lower the power or
temperature level, or switch on
the appliance after it is cooling
down naturally.
Operation being
interrupted during normal
use and E1 or E2 error
shown.
The input voltage unmatched
with the rated voltage.
Make sure the input voltage
match the rated voltage
marked on the appliance
before operation.
Operation being
interrupted during normal
use and E5 or E6 error
shown.
Temperature sensor error
Contact Shun Hing Electric
Service Centre Ltd. for
checking and repairing.
Error Code
E1
– Under voltage protection error
E2
– Over voltage protection error
E3
– Top plate temperature is too high
E4
– Overheat protection
E5
– Top plate temperature sensor error
E6
– Temperature sensor error
E7
– Control panel protection
If the above remedies/solutions cannot fix the problem, switch off the appliance immediately,
contact Shun Hing Electric Service Centre Ltd. (Tel: 2406 5666) for inspection and repairing.
To avoid any danger and damage to the appliance, do not disassemble or repair it by yourself.