34
Hot Caution Indicator
After finishing the operation, if the temperature of top plate reaches 50°C or above, the hot
caution indicator [
] / [H] will be flashing/ statically lighted, meaning that the top plate is still hot,
do not touch it.
Error Code
When there are some problems or using the appliance incorrectly, the respective error codes (E1
to E7) will be shown on the display. Operation will stop and generate discrete warning sound.
(Please refer to the check points and remedy shown on
Chapter.6 Troubleshooting and
Treatment
)
6.
Troubleshooting and Treatment
During operations, if any errors occurred, please check the following table before calling for
service. Below are common errors and the check points to perform.
Symptoms
Reason
Remedy
After connecting the
power and pressing the
[
] key, the appliance
has no response. The
control panel and display
light out.
Is the electricity in
suspension?
Use it after resuming the
electricity.
Is the fuse blown out?
Check the root causes
carefully. If the problem cannot
be fixed, please contact Shun
Hing Electric Service Centre
Ltd. for checking and repairing.
Is the power plug connected
firmly?
Operation being
interrupted during normal
use and E7 error shown.
Any water accumulated
covering the control panel?
Wipe off the accumulated
water by soft dry cloth.
Any damp cloth or magnetic
object are place on the
control panel?
Take the damp cloth or
magnetic object away from the
control panel.
The buzzer sounds
discontinuously and
cookware was not
heated up.
Incompatible cookware is
used?
Use compatible cookware for
the induction cooker.
Is the cookware not placed at
the center of the cooking
zone?
Place the cookware at the
center of the cooking zone.
Cookware is removed during
heating?
Place a cookware on the
cooking zone.
Operation being
interrupted during normal
use and E4 error shown.
Incompatible installation,
poor ventilation.
Install the appliance
appropriately and keep good
ventilation.
Is the intake/exhaust vent
clogged or dirt accumulated?
Remove the dirt clogged in the
intake/exhaust vent.
Summary of Contents for RIC-S44E
