Rasha Professional A/S 1800 Rustin Ave. Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
5
Safety Notes
This device has left our premises in absolutely perfect condition. In order
to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes
written in this user manual.
Important: Damages caused by the disregard of this user manual are
not subject to warranty. The dealer will not accept liability for any
resulting defects or problem
s.
Always plug in the power unit last.
Keep away from heaters and other heating sources! Keep away children
and amateurs from the device! Never leave the device running unattended!
If the device has been exposed to drastic temperature fluctuation (e. g. after
transportation), do not switch it on immediately. The arising condensation
water might damage your device. Leave the device switched off until it has
reached room temperature.
This device falls under protection-class III. It always has to be operated
with an appropriate transformer. Check the device, the power cord and
transformer from time to time. Make sure that the transformer is the correct
type as that stated on the rear panel.
Always disconnect from the main power when the device is not in use or
before cleaning it.
There are no serviceable parts inside the device. Maintenance and service
operations are only to be carried out by authorized dealers.
Please note that damages caused by manual modifications on the device
or unauthorized operation by unqualified persons are not subject to
warranty.
Personal
Safety
Avoid direct eye exposure to the light source while the product is on. Always
disconnect this product from its power source before servicing. Always
connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be
very hot.
Rigging
This device can be installed directly onto a truss with the quicklock
(included) system and triggerclamp (not included), wall or stage floor in
any orientation without altering its operation characteristics.
Use proper bolts to mount the device via its brackets. The brackets should
be attached to the device with proper bolts!
Always use a secondary safety rope that can hold at least 10 times the
weight of the device.
The minimum distance between the device and illuminated surface is 1
meter. There should not be any flammable materials 10 meters around
the device!
Power And
Wiring
Always make sure you are connecting this product to the proper voltage
in accordance with the specifications in this manual or on the product’s
specification label. Never connect this product to a dimmer pack or
rheostat. Never disconnect this product by pulling or tugging on the power
cable.
The term “DMX” used throughout this manual refers to the DMX512 digital data
transmission protocol
