Rasha Professional A/S 1800 Rustin Ave. Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
19
function. This function will optimizes performance, but if this function is out
of action, the pan or tilt motor will fails to work normally. If pan or tilt works
abnormally, try stop this function temporarily. Pan and tilt will run normally
without this function but, it will increase the amount of reset time, and
cause more impacts between the limit structures, and the positional errors
will not be corrected automatically when the step motors lose step. This
menu option only take effect when reboot the system.
9.11. Allow DMX save:
If select “Yes”, the setting values from functions DMX
channel(6/4/6) will be saved to EEPROM, that is, The setting value will be
retained for the next time when you reboot the system
(This menu selection is valid for all the settings in the function channel except for the
“Run mode”).
9.12. Clear Lamp Time:
Use the menu to reset the counter of operation hours with
the lamp to 0, when a new lamp replaces the old one.
9.13. Recover Setting:
Use the menu to reset factory settings. But the information
like fine tuning of motor, lamp switch state, user programs, lamp on time,
will not be resettled.
Please note* do not perform this Operation when the motors is rotating with high speed
because it will tack relatively long time to write the EEPROM
.
10. INFO:
10.1. DMX Monitor:
Display the DMX value from controller
Chn:
Use the menu to select desired channel which you need to watch.
Value:
Show the current value of the selected channel
10.2. State Monitor:
Display current running status
CPU1 TEMP ºC:
The menu shows the temperature of the CPU which is in
the fixture base.
CPU2 TEMP ºC:
The menu shows the temperature of the CPU witch is in
the fixture head.
Lamp TEMP ºC:
Shows the monitoring points temperature of the lamp.
If the temperature is lower than 0º or there is no temperature sensor for
digital detection (temperature sensor is fitted on some models only), it will
shows “Invalid”.
Battery (%):
Shows the battery capacity in percentage (notes that only
