Rasha Professional A/S 1800 Rustin Ave. Riverside CA, 92507
|
951-654-3585
rashaprofessional .com
|
21
may be broken. If CPU if overheated, it will automatically restart or
work abnormally.
CPU2 Overheat:
This message informs you that the motor driver PCB in
the fixture head had been overheated and the fan in the fixture head
may be broken. If the CPU if overheated, it will automatically restart
or work abnormally.
Flash Err:
There is a read or write error of the MCU flash memory. Please
contact your Dealer or Fabricator for repair assistance.
RAM Err:
A memory allocation failure occurs. Please contact your Dealer
or Fabricator for repair assistance.
License Expired:
The license has expired, please click the menu “Info” -
“Time Left” and input the serial number (SN) to continue using the
device.
10.5. P/T Reference Speed:
Shows the pan and tilt rotation time from start rotation to
stop. This time is for reference only,
Pan(.01s)
: Shows the pan rotation time from start rotation to stop.
Tilt (.01s):
Shows the tilt rotation time from start rotation to stop.
10.6. Time Left(h):
This menu shows how much permitted time/hours, you have left.
click to input the serial number(SN) if needed.
Input SN.:
Input the serial number to get the license for usage.
ID:
Shows the ID of the device.
10.7. Product Code:
This message informs you the product code of the firmware. It
provide a reference in maintenance only and the user can ignore them
usually.
000-000-00-000-000-00:
The code of firmware. The code shown here is
just an example, please refer to the machine for actual code.
15-12-8-143:
Shows the EEPROM flag. The flag shown here is just an
example, please refer to the machine for actual flag.
Security settings:
This menu is operated in factory only, the user may
ignore it.
Test Mode:
This menu is operated in factory only, the user may ignore it.
