Rascal AutoGo Owner’s Manual
EMC Part: 19286400 Rev.01 03/09/07
7
Initial Set-up
After receiving and unpacking your Rascal AutoGo use the following to initially set-up the vehicle. Set-up consists of
unfolding it from the flat-fold configuration, installing the Battery Pack, installing/setting the dashboard clock, and charging
the batteries.
Unfolding
The Rascal AutoGo is initially shipped in the flat fold configuration and must be unfolded for use. Unfold the Rascal
AutoGo according to the following:
• Raise tiller and dash to upright position
• Raise seat frame and lock into position using the Seat Frame Cams
• Install seat onto frame
• Raise seat backrest to driving position
