Raritan PX3TS, User Manual

Page: 675 / 842

651
You can perform a Secure Copy (SCP) command to update the PX3TS
firmware, do bulk configuration, or back up and restore the
configuration.
In This Chapter
Firmware Update via SCP ....................................................................... 650
Bulk Configuration via SCP ..................................................................... 651
Backup and Restore via SCP................................................................... 652
Downloading Diagnostic Data via SCP .................................................... 653
Firmware Update via SCP
Same as any PX3TS firmware update, all user management operations
are suspended and all login attempts fail during the SCP firmware
update. For details, see
Updating the PX3TS Firmware
(on page 413).
Warning: Do NOT perform the firmware upgrade over a wireless
network connection.
To update the firmware via SCP:
1. Type the following SCP command and press Enter.
scp <firmware file> <user name>@<device ip>:/fwupdate

<firmware file> is the PX3TS firmware's filename. If the firmware
file is not in the current directory, you must include the path in
the filename.

<user name> is the "admin" or any user profile with the
Firmware Update permission.

<device ip> is the IP address of the PX3TS that you want to
update.
2. When the system prompts you to enter the password for the
specified user profile, type it and press Enter.
3. The system transmits the specified firmware file to the PX3TS, and
shows the transmission speed and percentage.
4. When the transmission is complete, it shows the following message,
indicating that the PX3TS starts to update its firmware now. Wait
until the upgrade completes.
Starting firmware update. The connection will be closed
now.
Chapter 9 Using SCP Commands