Raritan PX3TS, User Manual

Page: 437 / 842

Chapter 6: Using the Web Interface
413
5. If wanted, you can resort the list by clicking the desired column
header. See
Sorting a List
(on page 149).
To clear the local log:
1. Click on the top-right corner.
2. Click Clear Log on the confirmation message.
Updating the PX3TS Firmware
Firmware files are available on Raritan website's Support page
( ).
When performing the firmware upgrade, the PX3TS keeps each outlet's
power status unchanged so no server operation is interrupted. During
and after the firmware upgrade, outlets that have been powered on prior
to the firmware upgrade remain powered ON and outlets that have been
powered off remain powered OFF.
You must be the administrator or a user with the Firmware Update
permission to update the PX3TS firmware.
Before starting the upgrade, read the release notes downloaded from
the Raritan website's
Support page
(
).
If you have any questions or concerns about the upgrade, contact Raritan
Technical Support BEFORE upgrading.
Note that firmware upgrade via iOS mobile devices, such as iPad,
requires the use of iCloud Drive or a file manager app.
Warning: Do NOT perform the firmware upgrade over a wireless
network connection.
Important: If you are upgrading an existing cascading chain from a
"pre-3.3.10" firmware version, you must follow the
Upgrade
Guidelines for Existing Cascading Chains (on page 414).
To update the firmware:
1. Choose Maintenance > Update Firmware.
2. Click to select an appropriate firmware file.
3. Click Upload. A progress bar appears to indicate the upload process.
4. Once complete, information of both installed and uploaded firmware
versions as well as compatibility and signature-checking results are
displayed.

If anything is incorrect, click Discard Upload.
5. To proceed with the update, click Update Firmware.