Raritan PX3-1000 series, User Manual

Page: 330 / 744

Chapter 6: Using the Web Interface
308
Execution
time Frequency settings
Yearly
This option requires three settings:

Month - January through December.

Day of month - 1 to 31.

Time - the value is measured in 12-hour format so you
must correctly specify AM or PM by clicking the AM/PM
button.
An example of the scheduled action is available in the section titled Send
Sensor Report Example (on page 308).
Send Sensor Report Example
To create a scheduled action for emailing a temperature sensor report
hourly, it requires:

A 'Send email' action

A 'Send sensor report' action

A timer - that is, the scheduled action
Steps:
1. Click to create a 'Send email' action that sends
an email to the desired recipient(s). For details, see Send Email (on
page 296).

In this example, this action is named
Email a Sensor Report.

If intended, you can customize the email messages in this action.
2. Click to create a 'Send sensor report' action
that includes the 'Email a Sensor Report' action as its destination
action. For details, see
Send Sensor Report
(on page 297).

In this example, this action is named Send Temperature Sensor
Readings.

You can specify more than one temperature sensor as needed in
this action.
3. Click to create a timer for
performing the 'Send Temperature Sensor Readings' action hourly.
For details, see
Scheduling an Action
(on page 306).

In this example, the timer is named
Hourly Temperature Sensor
Reports.

To perform the specified action at 12:30 pm, 01:30 pm, 02:30 pm,
and so on, select Hourly, and set the Minute to 30.