Raritan PX3-1000 series, User Manual

Page: 318 / 744

Chapter 6: Using the Web Interface
296
Request LHX/SHX Maximum Cooling
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will
be available. See
Miscellaneous
(on page 332).
The "Request LHX/SHX Maximum Cooling" action applies the maximum
cooling to the SHX-30 device only. The LHX-20 and LHX-40 devices do not
support this feature.
In the maximum cooling mode, an SHX-30 device runs at 100% fan speed
and the cold water valve is open 100%.
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Request LHX/SHX Maximum Cooling" from the Action list.
3. In the Available LHX/SHX field, select the desired SHX-30 device one
by one, or click Select All.
4. To remove any SHX-30 device from the Selected LHX/SHX field, click
that device's or click Deselect All.
Send Email
You can configure emails to be sent when an event occurs and can
customize the message.
Messages consist of a combination of free text and PX3 placeholders.
The placeholders represent information is pulled from the PX3 and
inserted into the message.
For example:
[USERNAME] logged into the device on [TIMESTAMP]
translates to
JQPublic logged into the device on 2012-January-30 21:00
For a list and definition of available variables, see
Email and SMS
Message Placeholders
(on page 309).
Operation:
1. Choose Device Settings > Event Rules > .
2. Select "Send email" from the Action list.
3. In the "Recipient Email Addresses" field, specify the email
address(es) of the recipient(s). Use a comma to separate multiple
email addresses.
4. To use the SMTP server specified on the SMTP Server page, make
sure the "Use custom SMTP Server" checkbox is NOT selected.