Raritan PCR8, User Manual

Page: 9 / 43

Safety Instructions
1. This unit is intended for indoor use only.
2. Do not install near water or expose this unit to moisture.
3. To prevent heat buildup, do not coil the power cord when in use.
4. Do not use extension cords.
5. Do not attempt to make any internal changes to the power source. Do not attempt to modify any portion or component
of a Remote Power Control unit unless specifically directed to. Raritan must perform any internal operations.
6. High-voltage surges and spikes can damage this equipment. To protect from such power surges and spikes, this unit
must have a good earth ground. There is an earth ground connection next to the circuit breaker.
7. Before removing or replacing any cables or power cords, power off the Remote Power Control unit. Communication to
the unit will be disrupted while power is off.
8. Do not exceed the AC current rating for the selected model. (Please refer to Appendix A: Specifications for further
information).
9. Although the power switch is turned OFF, the unit is not totally isolated from the power supply. In order to be
absolutely removed from the power supply, the power cord must be unplugged from the unit.
10. For PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device shall be incorporated in
the fixed wiring. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and easily
accessible.