MasterConsole connected to each channel of the base
MasterConsole II unit.
<Tab>
to the
Device
field. You must
specify the device for each channel .
See Figure 15.
The
Device
field consists of a sequence of characters equal to
the channel capacity of the base unit. The leftmost character
corresponds to the unit's channel 1, while the rightmost charac-
ter corresponds to the highest channel number.
For example, in
Figure 16
, the
y . . . . c . .
Device field indicates the fol-
lowing: an 8-channel MasterConsole II MCC8 model is connected to the
first channel on the base MasterConsole II, an 8-channel MasterConsole
P Model is connected to the sixth channel, and computers are connected
(or to be connected) to all other channels.
See
One-Tier Configuration
for instructions on setting/changing other
operational parameters (AutoScan, AutoSkip, ID Display, hot-key, Menu
Display, PowerSave).
20
Note:
If you specify a MasterConsole P Model, a pop-up box will
prompt for banking information.
.
(dot)
=
computer (default)
For non-computers, define the Device as follows:
a
=
MCP2
b
=
MCP4
c
=
MCP8
d
=
MCP16
x
=
MCC4, MCS4, MCX4
y
=
MCC8, MCS8, MCX8
z
=
MCC16, MCX16
Figure 15.
Device Types
Device: y . . . . c . .
Figure 16.
Device Field
Channel 1
Channel 8
Channel 6
