<Alt>.
·
To change the
Menu Display position:
Move to
Menu
and
press
<Enter>
. Then press the
<
Ï
>
,
<
Ð
>, <
Í
>,
and
<
Î
>
keys
to move the menu vertically and horizontally to the desired
position. Then press
<Esc>
or
<Enter>
.
·
To change the
Channel ID display position:
Move to
ID
and
press
<Enter>
. Then press the
<
Ï
>
,
<
Ð
>, <
Í
>,
and
<
Î
>
keys
to move the menu vertically and horizontally to the desired
position. Then press
<Esc>
or
<Enter>
.
·
To turn
PowerSave ON/OFF
(default is OFF): Move to
Green
Mode
and press the
<
Ï
>
/
<
Ð
>
keys to toggle. To change the
PowerSave delay time
(default is 15 minutes): Move to the
next field and type a number from 01 to 99, or press the
<
Ï
>
/
<
Ð
>
keys to change the interval (in minutes) of inactivity
(no keyboard or mouse operation) after which the video signal
will be cut off from the monitor. This will allow a properly
equipped monitor to enter low-energy mode.
·
To select
Previous Channel Toggle
(default is
CapsLock
).
This feature enables the user to toggle between the previous
and current selected channel. Press F4 to display the
Configuration menu (Figure 1) and move the cursor to the
Previous Channel Key. Use the <-> or <¯> keys to select the
key, <caps lock>, <scroll lock>, <num lock>, left <shift>, or left
<alt> to be used. This feature enables the user to switch back
to a previous channel by pressing the selected key twice rapid-
ly. There is no need to activate the OSUI.
NOTE: Select a previous channel key that is not being used as
the current hot key activator.
4.
To
exit
the Configuration Menu: Press an appropriate
Menu F
key to go to another menu, or press
<Esc>
to
exit
On-Screen
User Interface and return to normal computer operation. Any
changes made to the Configuration Menu are automatically
saved.
Assigning Names and Scan Rates (One-Tier)
You may assign meaningful names to quickly and easily identify and
select connected computers. By default, the channel name is
PC00aa
(where
aa
is the channel ID number) and the Channel-Specific Scan
Rate is 3 seconds.
1.
Activate
On-Screen User Interface.
8
