Chapter 1: Introduction to Environmental Sensor Packages
3
Sensor Comparison
Sensor
family
Connection
interface
Support for
sensor daisy
chain
Chain position
availability*
Support for a
Raritan sensor
hub
Automatic
sensor firmware
update
DPX
RJ-12
**
(1) / (2)
DPX2
RJ-12
***
(2)
DPX3
RJ-45
(2)
DX
RJ-45
(2)
DX2
RJ-45
(2)
* Chain position availability column indicates whether a sensor's position
in a sensor daisy chain is available or not. This information is retrievable
from the Raritan or Legrand product where the sensor is connected,
such as PX3 or Legrand PDU.
** Most DPX sensor packages do NOT support daisy chaining except the
differential air pressure sensor, DPX-T1DP1.
*** DPX2 sensors can be daisy chained via one DPX2 sensor cable, but
you cannot daisy chain multiple DPX2 sensor cables.
(1) The first generation of sensor hub DPX-ENVHUB4 is supported by
"DPX" sensor packages only.
(2) The newer sensor hub DPX3-ENVHUB4 is supported by all Raritan
sensor packages. To connect DPX and DPX2 sensor packages to this hub,
the RJ-12 (female) to RJ-45 (male) adapter cable (P/N: 254-01-0036-00)
shipped with DPX or DPX2 is required.
Sensor Support Guidelines
The Raritan and Legrand products listed in the section
Products
Supporting Raritan Sensor Packages
(on page viii) support all types of
Raritan environmental sensor packages except for the following
restriction.
Only PX3, PX3TS and Legrand PDUs support
DX-PD2C5
(on page 24)
and
DX2-DH2C2 Door Handle Controller
(on page 6).
