29
10.2 Saving Preset Settings
Different camera and frame grabber settings can be saved in the
“Preset”
tab under the
PIXCI (relevant frame grabber model number) section of the GUI, as shown in Figure 22.
Up to three different presets can be saved per settings file. If the camera is set to a desired
state outside of the default state, clicking
“Save 1”
will save all the current parameter states
that have been set
.
This can be done a further two times. These camera states can be
recalled at any time by using the recall buttons. The overall settings file can then be saved
and loaded in this tab also. Three preset states is the maximum number that can be saved in
a settings file.
Figure 22: Presets Tab.
