background image

10

Remote Control

15.

16.

17. 

18.

19.

20.

21.

22.

SYNC
Used to adjust subtitle synchronization timing 
when while playing a video. You can adjust the 
synchronization timing by 1 second upon pushing 
this button.

VOL
Controls volume.

MUTE
Temporarily silence the audio.

Arrow Keys
Selects an option in the menu.

Also performs the following functions when playing 
a video.

- Up/Down keys

   Moves the position of subtitle.

- Right/Left keys

   Video: Skip by 30 seconds
   Music: Skip by 5 seconds
   Image: Rotate images

STOP/RETURN
Stops playing video, music or images.
If this is pushed on the main screen, you will return 
to the upper level folder.

SEARCH
Searches the video file forward or backward with 
quick. Search speed is increased or decreased 2, 4, 
16, or 32 times upon pushing this button.

F1/F2
Reserved function buttons for adding functions in 
future.

SKIP
Skip to next chapter or track during playback. When 
used on main screen, file list is skipped by page.

23.

24.

25.

Play/Pause
Start or pause playback of video, music or images.

OK
Used to select menu option or to play video, music 
or images.

GOTO
Skips to the point of time you want to view from 
current time during playback. Type the point of time 
using arrow keys or numerical buttons and push the 
OK button to proceed.

Note:

All files in a folder are played sequentially. If the 
folder has a sub-folder in it, files in the sub-folder 
are also played repeatedly without limit before 
being stopped playing.

For images, use the play button for slide show.

Note:

When the OK button is used, files in a folder are 
played and then are stopped playing. Also, if 
there is a problem with images or synchronization 
between image and audio during playback, just 
press this button then the video refreshes and the 
problem is fixed.

Summary of Contents for RSH-250
















Reviews: