10
1.
Make sure all components are connected correctly (control box, control panel, power cable and
connecting cable, lifting columns).
2.
Connect the power cable to a 110/240VAC outlet. After the control panel will display "62.0" sign for a
few seconds, the system is turn on and the desk is ready for use.
3. Up and Down
Press and hold the "
UP
" button to move up the desk to the desired height. The desk will stop when the
button is released.
Press and hold the "
DOWN
" button to lower the desk to the desired height. The desk will stop when the
button is released.
4. Memory Settings
After adjusting the desk height using the "
UP
"/"
DOWN
" buttons, press the
"M"
button and "
S -
" sign will
be displayed on the control panel. Then press the desired button from 1 to 4 to assign the current height to
a number on the keypad. Can be saved and memorized 3 different heights.
Moving the desk to a preset height can be done by pressing the corresponding button from 1 to 3.
During operation you can stop the desk by pressing one of the "
UP
"/"
DOWN
" buttons.
5. Keypad Lock
To lock: Press and hold "
UP
" and "
DOWN
" buttons for 5 seconds until "
LOC
" sign appears on the display,
indicating that the system is locked.
To unlock: Press the "
UP
" and "
DOWN
" buttons for 5 seconds at a same time until the "
LOC
" sign
disappears and the height of the desk is displayed, indicating that the system is ready to be adjusted again.
6. Reset
When the system is experiencing a problem or the control panel displays "
RES
", the system must be reset.
Press and hold the "
DOWN
" button throughout the process. After 5 seconds, the desk will lower slightly
until it reaches its lowest height, then rises slightly and the display changes back to the numeric height
setting.After the desk stops, the reset process is successfully completed.
