background image

WARRANTY REGISTRATION

You can register online at 

www.rapidspray.net/resources/warranty-registration

 or 

complete all the details below and post this form back to: 

Rapid Spray, PO Box 3119, Singleton NSW 2330

Model  ......................................................  Serial No  .....................................................

Purchased From  ............................................................................................................ 

(Dealer Name & Town)

Purchaser’s Name  .........................................................................................................

Purchaser’s Address  ......................................................................................................

.........................................................................................................................................

Purchaser’s Phone Number  ..........................................................................................

Disclaimer: If you don’t want us to keep you informed of new products, please tick 
the following circle:

To help us help you further, please complete the following: 
Purchaser’s Age

          Up to 25
          25 - 40 
          41 - 55
          Over 55

What influenced you to purchase a Rapid Spray product? 

          Received Catalogue   

 

Better features than competitor product

          Newspaper advertisement   

Quality & reliability

          Magazine advertisement 

 

Price

          Dealer recommendation 

 

Past experience with Rapid Spray products

          Friends recommendation 

 

Other......................................................

Principal Usage

          Commercial farm 

 

Town council

          Hobby farm  

 

Hire company

          Industrial   

 

Home

          Other......................................................

What other Rapid Spray products do you use? 

          Spray tanks  

 

 

Boom sprayers

          Cartage tanks 

 

 

Bertolini pumps & controllers

          Diesel tanks  

 

 

Inter knapsacks | Compression sprayers

          Fire fighting  

 

 

Other......................................................

Summary of Contents for BUDDY MARSHAL PRO Series

































Reviews: