Compact Field Sprayers by Rapid Spray
Rapid Spray Marshal Pro Operators Handbook
12
BOOM REGULATOR KIT |
ATRVS10B400P
If your Marshal Pro sprayer has been fitted with a low pressure boom regulation kit
and solenoid, you can use this to accurately regulator the output pressure for boom or
boomless nozzle spraying.
SETUP & OPERATION
1.
Connect the solenoid battery clips to your 12 volt DC power source;
2.
Connect your boom or boomless nozzle to the 1/2″ MBSP outlet fitting or supplied
10mm hose tail which exits the solenoid valve;
3.
Turn the regulator control t-bar (silver) anti-clockwise until it is completely open.
Loosen the locking nut if required;
4.
Turn on the pump and adjust the main high pressure regulator (black knob) to 10bar;
5.
Open the small ball valve on the high pressure manifold to allow liquid to enter the low
pressure regulator;
6.
Slowly turn the t-bar control on the low pressure regulator clockwise until the desired
pressure is reached on the gauge while spraying our of the boom/boomless nozzle;
NOTE:
if you are using high pressure to spray with the hand gun, you will need to turn off
the tap feeding the low pressure manifold or you will not be able to increase the pressure
past 15bar.
High Pressure
Regulator
T-Bar Regulator
Control
MBSP Outlet
