Rapid Packaging Eagle 2000A Series, Operation Manual

Page: 9 / 41

- 9 -
2.2 Transportation
You must have at least 4ft fork tubes or tube extensions fully inserted into the machine and a forklift rated for
3,000lbs to transport the machine safely. Do not raise the load more than 6” off of the ground.
(See Fig. 2-2)
ALWAYS USE OSHA HANDLING PROCEDURES FOR HANDLING THE STRETCH
WRAPPER AND REMEMBER TO NEVER PUSH, DRAG, OR SLIDE THE MACHINE!
Do not transport machine from turntable when mast is
lowered!
When transporting the machine in this configuration;
1.
Inspection cover must be removed before raising or
lowering the mast.
2. Carriage must be raised 8 inches
Carriage must be raised 6~8 inches before attempting to lift
machine from this end.
It is acceptable to transport machine by turntable when mast
has been raised.