Rapid Packaging Eagle 2000A Series, Operation Manual

Page: 10 / 41

- 10 -
2.3 Installation
Step 1 - Place the machine in the desired location using a tow motor or crane capable of handling a load of
3,000lbs.
(See Fig. 2-3)
Fig. 2-3
Step 2 - Remove the lower rear inspection panel on the mast prior to raising the mast. The panel is located on
the end of the machine next to the turntable motor
.
The panel has a warning label affixed to it.
(See Fig. 2-4a &
Fig. 2-4b)
Fig. 2-4a Fig. 2-4b
Step 3 - Lift the mast using hoisting tools. A tow motor or hoist rated for at least 3,000lbs is required. While
lifting the mast, use caution to ensure that wires and connectors are not pinched.
(See Fig. 2-5a)
Once the machine is fully upright, one individual can stabilize the mast while a second individual fastens the
four M10 bolts to secure the mast to the base. The M10 bolts are to be tightened to 30ft/lbs of torque.
(See Fig.
2-5b)
Fig. 2-5a Fig. 2-5b