Rapid Packaging Eagle 2000A Series, Operation Manual

Page: 12 / 41

- 12 -
2.3 Installation
Step 6
- Insert the connector plug inside the bottom of the mast into the corresponding receptacles.
(See Fig 2-
9a, 2-9b, 2-9c)
Fig. 2-9a Fig. 2-9b Fig. 2-9c
Note: These connectors are for photo-electric eye, home limit switch, and E-Stop switch located on the
bottom of the carriage.
Step 7 - Fasten the lower rear panel into the corresponding position on the post using the pin.
(See Fig. 2-10)
Fig. 2-10
Step 8
- Verify that all screws are tight and then turn on the power. Check to see if the power indicator is on
and that text is displayed on the LCD screen.