1 IMPORTANT SAFETY INSTRUCTIONS
• SAVE THESE INSTRUCTIONS - DANGER: TO REDUCE
RISK OF FIRE OR ELECTRICAL SHOCK CAREFULLY
OBEY THESE INSTRUCTIONS.
• Confirm the voltage available at each country location
before using the charger.
• The R12CB is meant for use with
50/60Hz VAC only.
• DO NOT allow liquid inside the charger.
• DO NOT try to use the charger for any other purpose
than what is presented in this manual.
• Unplug the charger before cleaning and when there is
no battery pack in the charger.
• Do not try to connect two chargers together.
• Do not use the charger in the circumstances that the
output Polarity does not match the load polarity.
• For indoor use only.
• The charger may under no circumstances be opened. If
the charger is damaged, then the charger may no
longer be used.
• R12CB is only to be used with R12B battery pack .
WARNING
To avoid risk of fire, electrical shock, or electrocution:
• Do not use a damp cloth or detergent on the battery
or battery charger.
• Always remove the battery pack before cleaning,
inspecting, or performing any maintenance on
the tool.
2 SPECIAL RULES FOR CHARGER
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply
with the limits for a Class II digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protec-
tion against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio or television reception, The
reception can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
3 SYMBOLS ON THE PRODUCT
You can use below symbols on the machine. Please
study them and learn their definitions. Correct
interpretation of these symbols let you operate the tool
better and safer.
Symbol
Explanation
Class II
For indoor use only
Before charging, read the instructions
Fuse
Precautions that involve your safety.
4 RECYCLE
The following symbol words and meanings are intended
to explain the levels of risk associated with this product.
Separate collection. You must not discard
with usual household waste. If it is necessary
to replace the machine, or if it is no more
use to you, do not discard it with household
waste. Make this machine available for
separate collection.
Separate collection of used machine and
packaging let you recycle materials and use
them again. Use of the recycled materials
helps prevent environmental pollution and
decreases the requirements for raw materi-
als.
At the end of their useful life, discard batteries
with a precaution for our environment. The
battery contains material that is dangerous to
you and the environment. You must remove
and discard these materials separately at a
location that accepts lithium-ion batteries.
